Solar System Analyzer Mi550 Three Phase Power Data Logger Digital Energy Meter Power Analyzer

• After-sales Service: 5 Year
• Warranty: 5 Year
• Display: Digital
• Installation: Direct Connected
• Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
• Electric Equipment: Three-phase Four-wire
• Model NO.: Mi550
• Theory: Electronic Meter
• Measured Signal: Continuous Wave
• Type: Energy Meter
• Certification: RoHS, ISO, CE
• Customized: Customized
• Current Sensor: 333mv CT/ Rogowski Coil
• Storage: 32GB Memory,USB Disk Download
• Power Quality: Voltage Swell and DIP, Waveform Display
• Graphs Display: Waveform, Vector Diagram and Histogram Display
• Power Supply 1: 2*18650 Lithium Battery
• Power Supply 2: 5VDC, 2A Power Supply(Included Adaptor)
• Rated Current: 0-18000A
• Voltage Range: 0-600VAC
• Current Input: BNC Connector
• Voltage Input: Banana Plug
• Communication Protocol: Modbus TCP, Ethernet RJ45 Port
• Sampling Rate: 8K Samples Per Second
• Harmonic: 50th in The Mean Time
• Wiring System: 3p4w, 3p3w, 1p2w
• Frequency: 45...65 Hz
• Transport Package: Carton
• Specification: 850g (with Accessory 2kgs)
• Trademark: MEATROL
• Origin: China
• HS Code: 9030331000
• Production Capacity: 50000PCS/Year

Product Description

                                                                                                                        Senior product consultant
                                                                                                                                                   Susan 

 

Mi550 Characteristics:

 

1 Handheld power quality analyzer

2 Built-in lithium batteries

3 Built-in 32GB memory

4 Export data from a USB flash drive

5 4 inch IPS display

6 CO2 emission factor

7 Support Chinese, English, multilingual display

8 Communication: RJ45-Ethernet, Modbus-TCP/IP

9 Data, event, 1-50 harmonic values and waveform record.

10 Graphs : waveform, vector diagram and histogram display

1)Power quality:Voltage swell and dip

(Record time, amplitude value, voltage RMS 1/2 value of each phase and voltage waveform of each phase)

2)

Waveform display Ua,Ub,Uc,Ia,Ib,Ic

Waveform reading (UDP protocol)

11 Accessories: 5pcs voltage clamp, adaptor, 5pcs magnetic probe

12 The internal electric energy chip: the world's top ADE9000 chip

1. Product description

Mi550 handheld three phase power quality analyzer, externally connected with open type Rogowski coil or voltage type CT, it can realize none dismantling wire test, simplify test steps, save construction cost, and is more convenient for engineering test as well as the inspection and maintenance of distribution system.

1. Support systems of single-phase and three-phase. It can measure multiple electrical parameters such as current, voltage, power factor, power, energy, and power quality parameters including harmonic, unbalance degree, voltage swell and voltage dip, etc.
2. In addition to the measurement function, Mi550 is equipped with various records, such as waveform records and programmable interval measurement value records. To store and record data, it is internally embedded 32 GB memory card.
3. With standard configuration of RJ45 Ethernet communication interface, through standard Modbus TCP protocol, it is compatible with various configuration systems and could transmit the electrical parameters collected by the front end to the system data center in real time.
   1. General parameters

Table 11 General parameters

Product name
Model No.	Mi550
Type	Handheld Three phase power quality analyzer
Application field
Application field	Power analysis, Power measurement, Power quality analysis
Wiring mode
Wiring system	3P4W_4CT 3P4W_3CT 3P3W_3CT 3P3W_2CT 1P2w
Current sensor	Rogowski coil Voltage-output current clamp
Voltage access	Direct access Connected through voltage transformer
Storage
Type	TF card
Capacity	32GB
Data export	U disk export (U disk file is FAT32 system)
Communication
Interface	RJ45- Ethernet
Protocol	Modbus-TCP
Power Supply
Adapter input	5VDC, 2A
Battery	Rechargeable lithium battery, specification 18650, 2 pcs, capacity about 4000mAh
Battery purely working time	≥6h
Battery charging time (off state)	≤5h
Power saving mode	The brightness of the screen backlight is adjustable. The automatic screen off time is adjustable.
Display
Size	3.97 inch
Type	IPS display
Resolution ratio	480*800
Machinery
Dimention	215*130*60mm
Weight	850g
Environment
Working environment	Temperature-20ºC~+55ºC, Humidity below 90% RH
Storage environment	Temperature-40ºC~+70ºC, Humidity below 95% RH(non-condensing)
Altitude	≤2km
Measurement category	CAT III 600V
IP code	IP30

 

1. 1. Measurement parameters

Table 12 Measurement parameters

Real-time measurement data
Voltage	Phase voltage: Phase ABC N phase to ground voltage Line voltage: UAB, UBC, UCA Voltage peak coefficient: Phase ABC Voltage peak: Phase ABC
Current	Phase current: Phase ABCN Current peak coefficient: Phase ABC K Factor: Phase ABC
Frequency	Line frequency
Power	Active power: Phase ABC and total Reactive power: Phase ABC and total Apparent power: Phase ABC and total
Power factor	Phase ABC and total
Fundamental harmonic power factor	Phase ABC and total
Electrical energy	Active Energy: Phase ABC and total (import / export) Reactive energy: Phase ABC and total (import / export) Apparent Energy: Phase ABC and total CO2 emissions
Harmonic measurement data
Voltage harmonics	THD (Total harmonic percentage), TOHD (Odd total harmonic percentage), TEHD (Even total harmonic percentage), phase ABC 1-50^th harmonic percentage, phase ABC 1-50^th harmonic voltage value
Current harmonics	THD (Total harmonic percentage), TOHD (Odd total harmonic percentage), TEHD (Even total harmonic percentage), phase ABC 1- 50^th  harmonic percentage, phase ABC 1-50^th harmonic current value
Waveform
Voltage waveform	Phase ABC voltage waveform or UAB, UBC, UCA line voltage waveform
Current waveform	Phase ABC current waveform
Phase angle
Voltag pehase angle	Phase ABC
Current pehase angle	Phase ABC
Phase angle between voltage and current	Phase ABC
Unbalance
Unbalance	Voltage unbalance, current unbalance
Demand
Power demand and peak demand	Phase ABC active power and total power, phase ABC reactive power and total power, phase ABC apparent power and total power
Current demand and peak demand	Phase ABC

1. 1. Parameter accuracy

Table 13 Parameter accuracy

Parameter	Type	Description
Voltage	Channel input voltage range	0-600VAC
	Measurement range	0-600VAC
	Measurement accuracy	0.2%
Current	Channel input voltage range	0-420mVAC
	Measurement range	Different current sensors have different measuring ranges
	Measurement accuracy	0.2%+ Accuracy of current sensor
Frequency	Measurement range	45Hz-65Hz
	Measurement accuracy	±0.001Hz
Power factor	Measurement range	-1-+1
	Measurement accuracy	±0.005
Power	Active power accuracy	0.5%
	Reactive power accuracy	1%
	Apparent power accuracy	0.5%
Energy	Active energy accuracy	0.5%
	Reactive energy accuracy	1%
	Apparent energy accuracy	0.5%

1. 1. Record storage

Table 14 Record storage

Data record
Record name	Settable
Record start time	Settable
Record duration	Selectable
Recording interval	Settable
Basic data record	Phase voltage Line voltage Current Frequency Power factor Fundamental harmonic power factor Power(Active, Reactive, Apparent) Active Energy (Import energy, Export energy) Reactive energy (Import energy, Export energy) Apparent Energy Voltage harmonics (Total harmonic, odd total harmonic, even total harmonic) Current harmonics (Total harmonic, odd total harmonic, even total harmonic) Phase voltage peak Peak factor of phase voltage Current crest factor Current K factor Voltage unbalance (negative sequence, zero sequence) Current unbalance (negative sequence, zero sequence) Angle (phase voltage angle, phase current angle, angle between voltages, angle between currents, angle between voltages and currents) Max min (Phase voltage, Line voltage, Current, Frequency, Power factor, Fundamental harmonic power factor, Active power, Reactive power, Apparent power) Demand (Current, Active power, Reactive power, Apparent power) Peak Demand (Current, Active power, Reactive power, Apparent power)
Voltage harmonic data record	Voltage harmonics (Total harmonic distortion THD, Odd total harmonic TOHD, Even total harmonic TEHD, 1-50^th Harmonic percentage and voltage value)
Current harmonic data record	Current harmonics (total harmonic distortion THD, Odd total harmonicTOHD, Even total harmonic TEHD, 1-50^th Harmonic percentage and current value)
Data storage format	CSV
Event record^[[1]]
Recorded data	Event type Start time Duration Amplitude value
Data storage format	CSV
Waveform recording
Record name	Settable
Record the start time	Settable
Record the duration	Settable
Sampling rate	Settable
Logged data	Phase ABC voltage waveform Phase ABC current waveform
Data storage format	CSV

 

 

Safety and warning notes

In order to guarantee safe operation of the transducer and to be able to make proper use of all features and functions,please read these instructions thoroughly! Safe operation can only be guaranteed if the transducer is used for the purpose it has been designed for and within the limits of the technical specifications. Ensure you get up-to-date technical information that can be found in the latest associated datasheet under Rogowski website.