STP High Accuracy Electronic Transformer 333mv Output

• Type: Rogowski
• Output Signal Type: Analog Output
• Production Process: Integration
• Material: Metal
• Accuracy Grade: 0.5G
• Application: All Electronic, Electrical, Electric Related Cases
• Model NO.: STP/NRC-200
• IP Rating: IP20
• Certification: CE
• Customized: Customized
• Current Range(RMS): 0.5-100ka AC
• Output: 150mv, 333mv, 500mv, 1V, 1.5V, 3V
• Accuracy(Typ.): Calibrated <0.5% (Central Position, 25ºC)
• Bandwidth: 20Hz to 2kHz
• Power Supply: 3.3V-5V DC
• Power Consumption: ≤ 20MW
• Terminal: RJ45/ 8pin
• Built-in Integrator: Selectable
• Linearity: ±0.2% (5%-200%)
• Phase Error: ≤0.5°
• Output on 0A(Zero Drift): ≤2mv
• Temperature Drift: 200ppm/ºC
• Operating Temperature: -20ºC to 70ºC
• Storage Temperature: -30ºC to 90ºC
• Relative Humidity: 80% Max. Without Condensation
• Transport Package: Poly Bag, Standard Export Carton
• Specification: CE
• Trademark: Meatrol
• Origin: Shanghai
• HS Code: 8504311000
• Production Capacity: 50000PCS/Month

Product Description

STP Splitter

 

Three in one STP splitter (Built-in integrator selectable)

The product description

STP with an selectable built-in integrator that outputs a three-way Rogowski coil signal through an RJ45 port or 8 Pin. Power supply 3.3 ~ 5V , 150mV, 333mV, 500mV, 1V, 1.5V, 3V AC output is optional.

Advantage

Portable mini, easy for installationl
 

Analog connection diagram

Size chart

RJ45 connector definition

Specification
 

MODEL	STP
Rated output	100A 600A 1000A 3000A 6000A  ....
Rated output	333mV AC
Maximum Output(overload)	3V rms
Power supply	3.3V-5V DC
Power consumption	≤20mW
Bandwidth	20Hz-2kHz
Read Accuracy	1% typical at 1%(≥10A) to 200% of rated Current @25ºC
Linearity	±0.2% (5% - 200% )
Phase error	≤0.5°
Minimum Current measurement	0.5A (Ripple 100mA)
Output on 0A  (zero drift)	≤2mV
Temperature drift	200ppm/ºC
Operating temperature	-20ºC - 70ºC
Storage temperature	-30ºC - 90ºC
Relative humidity:	80% max.without condensation
Protection degree:	IP20
Other requirements, please contact us to OEM.

Safety instructions
The coil is only safe if used within the appropriate parameters. Please read the following instructions carefully
You can download the latest product instructions on our rogowski website.

Warning!
Ignoring this warning can lead to serious danger!
The Roche coil can only be installed and operated by professionals with electrical training and qualifications.
The installation or operation shall comply with the applicable national security regulations and the relevant
manufacturer's instructions. Used in electrical or electronic equipment that meets parameters and safety
requirements..


Electric shock warning!
Some parts of the module may carry dangerous voltages when operating the Roche coil. The user should ensure
that all necessary measures are taken to prevent electric shock. A Roche coil is a built-in device containing
conductive parts that should not be touched after installation. A protective cover or additional insulation may be
required.
When the equipment breaks down and needs to be repaired. Unless it is confirmed that there are no hazardous
live modules in or near this power system, operations such as maintenance should be carried out after the main
power supply is disconnected.

Only when properly transported, stored, installed, and carefully operated and maintained can the coil be safely
and trouble-free.


Attention!

Do not damage the coil. Twisting, pricking, over-squeezing, over-bending will greatly reduce the accuracy and
service life of the equipment.

What is a Rogowski coil?
Rogowski coils have been used for the detection and measurement of electric currents for decades. They are based on a simple principle: an "air-cored" coil is placed around the conductor in a toroidal fashion and the magnetic field produced by the current induces a voltage in the coil. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current.
By using precision winding techniques, especially developed for the purpose, the coils are manufactured so that their output is not influenced by the position of the conductor within the toroid, and to reject interference from external magnetic fields caused, for example, from nearby conductors.Basically, a Rogowski coil current measuring system consists of a combination of a coil and conditioning electronics.Rogowski coil current transducers are used for the AC measurement.
They can be used in similar circumstances to current transformers but for many applications they have considerable advantages:
• Wide dynamic range.
• High linearity.
• Very useful with large size or awkward shaped conductors or in places with limited access. Thanks to the structure without hard core, the coil can be easily manufactured according to the application or to the available space.
• Unlike traditional current transducers, there is no danger from open-circuited secondaries.
• They cannot be damaged by large overloads.
• They are non-intrusive. They draw no power from the main circuit carrying the current to be measured.
• They are also light weighted and in some applications are light enough to be suspended on the conductor being measured.

The transducer does not measure direct currents but, unlike a current transformer, it can carry out accurate measurements of AC component even if there is a large superimposed DC component, since there is no iron core causing saturation. This feature is particularly useful for measuring ripple currents for example in battery charging systems.


MEATROL Rogowski coil Model No. Definition:

Description	Connector model	Window size B	Signal cable length E	Ratio		Model No.
				Calibrated (mV/kA@50Hz)	Uncalibrated (mV/kA@50Hz)
Ø 6 Mini type with fixing ribbon ties	MRC	16	2m	50 (60mV/kA@60Hz)	60 (72mV/kA@60Hz)	MRC-16-2m-50
		24				MRC-24-2m-50
		36				MRC-36-2m-50
Ø8 Rotate bayonet type Easy installation with fixing ribbon ties	NRC	100	2m	85	105	NRC-100-2m-85
		150		85		NRC-150-2m-85
		200		50		NRC-200-2m-50
Ø12 High Voltage 36kV	D-SRC	50	2m	________	60 (72mV/kA@60Hz)	D-SRC-50-2m-60
		100				D-SRC-100-2m-60
		150				D-SRC-150-2m-60
Ø12 High Sensitivity	SRC	50	2m	333	360	SRC-50-2m-333
		100				SRC-100-2m-333
		150				SRC-150-2m-333
Ø 6 precision type	TRC	16	2m	50	60	TRC-16-2m-50
		24				TRC-24-2m-50
		36				TRC-36-2m-50
Ø8 Snap-in type Easy installation	ZRC	50	2m	100 / 85 / 50	105	ZRC-50-2m-85
		100				ZRC-100-2m-85
		150				ZRC-150-2m-85
Ø8 Spiral joint Suitable for long term stable installation	Y-FCT	B50	2m	85	110	Y-FCT-B50-2m-85
		B100		85		Y-FCT-B100-2m-85
		B150		85		Y-FCT-B150-2m-85
		B240		50		Y-FCT-B240-2m-50
Ø8 High Frequency	H-FCT	B50	2m	1.2 / 6.8 / 10		H-FCT-B50-2m-10
		B95				H-FCT-95-2m-10