STP3 in 1 RJ45 Port Current Sensor

• Transport Package: Carton
• Trademark: MEATROL
• Origin: Shanghai, China
• Model NO.: STP3
• HS Code: 8504109000
• Production Capacity: 1000

Product Description

STP 3 in 1 RJ45 port Current Sensor,
     STP 3 in 1 RJ45 port Current Sensor built-in integrator, the three-way Rogowski coil signal is converted into the signal through the integrator and then output through an RJ45 port.
   3 IN 1 current sensor with RJ45 port much easy to install
   High linearity from 1% to 100% F.S.
   Wide dynamic range
   Very useful with large size or awkward shaped conductors or in places with limited accessExcellent degree of rejection to the external current conductor
Feature
   STP is 3 in 1 RJ45 port current sensor series,it includ 333mV output Split core Current transformer and Flexible rogowski coil both.Much easy to install compare to other traditional power meter.

MODEL	STP
Current Sensor type	Split core Current transformer Rogowski coil
Rated current	5A 100A 100A ... 10kA
Rated Output	333mV, 3V AC
Power Supply	5V DC
Power Consumption	≤20mW
RJ45 Cable length	0.3meter
Read Accuracy	<0.5% from 1% to 100% F.S.  (central position, 25ºC)
Temperature	Calibrated  300ppm/C
Output on 0A (zero drift)	≤0.05mV
Phase error	≤0.5°
Linearity	±0.2% of reading
Bandwidth	1Hz to 10kHz(-3dB)
Operating temperature	-30ºC to 80ºC
Storage temperature	-40ºC to 90ºC
Other requirements, please contact us to OEM.

Safety and warning notes
   In order to guarantee safe operation of the transducer and to be able to make proper use of all features and functions,please read these instructions thoroughly!Safe operation can only be guaranteed if the transducer is used for the purpose it has been designed for and within the limits of the technical specifications.
Caution!Risk of danger
   Ignoring the warnings can lead to serious injury and/or cause damage!
   The electric measuring transducer may only be installed and put into operation by qualified personnel that have received an appropriate training,The corresponding national regulations shall be observed during installation and operation of the transducer and any electrical conductor.The transducer shall be used in electric/electronic equipment the respect to applicable standards and safety requirements and in accordance with all the related systems and components manufacturers' operating instructions.
Caution!Risk of electrical shock
   When operating the transducer,certain parts of the module may carry hazardous live voltage(e.g.primary conductor).The user shall ensure to take all measures necessary to protect against electrical shock.The transducer is a build-in device containing conducting parts that shall not be accessible after installation.A protective enclosure or additional insulation barrier may be necessary.Installation and maintenance shall be done with the main power supply disconnected except if there are no hazardous live parts in or in close proximity to the system and if the applicable national regulations are fully observed.
Safe and trouble-free operation of this transducer can only be guaranteed if transport,storage and installation are carried out correctly and operation and maintenance are carried out with care.
WARING!
   Do not stress the coil by applying any kind of mechanical force(ie.twisting,puncturing,excessive pressure,tight bending,etc.) which will dramatically degrade the device's accuracy.
For more detailed information, please refer to the company's manual or letter inquiries